Description
DEKAsyl MS-5 is a high-quality power adhesive with a high initial strength which can be used in the entire vehicle construction.
The fields of application are manifold and can be extended at will.
Colour: Black
Content: 290 mL
Packaging: Cartridge
Areas of application:
Bonding of among other things:
– Metal frame
– Corner profiles
– Structural bonding of polyester parts
– Climate boxes
– Solar systems
– SAT Systems
– Frames and wheel covers
– And much more
Proper use:
DEKAsyl MS-5 can be easily applied with a hand or air gun. For sealing, Dekasyl MS-5 should be applied or smoothed within 12 minutes (at 20°C/50% relative humidity) with a spatula or putty knife previously dipped in a mild soap solution.
Avoid penetration of the side solution between the connection sides and the sealant, as this will lead to a loss of adhesive force. For adhesion, the substrates must be assembled within 15 minutes (at 20°C/50% relative humidity) after applying Dekasyl MS-5. The higher the temperature, the shorter the processing time! In general, an adhesive layer of 2 mm is recommended if similar materials (with similar strength) are to be glued. The greater the difference in thermal expansion, the thicker the adhesive layer should be. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-5 can be painted over with most industrial paints after only 10 minutes. The best possible adhesion of paint layers is achieved if the paint is applied 4 hours after application of Dekasyl MS-5. Clean the tools or remove non-hardened residues of Dekasyl MS-5 with a clean, colourless cloth soaked in acetone or MEK (it is recommended to check beforehand whether the surface is attacked by this cleaner).
Technical data:
Base material: MS Polymer
Hardening/ Sealing: Moisture
Specific gravity: approx. 1.4 kg/litre
Film formation time (20°C/50% relative humidity): approx. 12 minutes
Exposed time (20°C/50% rel. LF): < 15 minutes
Hardening after 24 h (20°C/50% rel. LF): approx. 4 mm
Shore A hardness (DIN 53505): approx. 55
Volume change (DIN 52451): < 3%.
Adhesion strength (physical rheometer MC100): approx. 700 Pa
(Measure for the maximum uncured amount of adhesive that can be applied per m² without running down)
Tensile stress (100%) (DIN 53504/ISO 37): approx. 1.7 MPa
Tensile stress at break (DIN 53504/ISO 37): approx. 2.8 MPa
Elongation at break (DIN 53504/ISO 27): approx. 210%.
Shear stress (DIN 53283/ASTM D1002): approx. 2.5 MPa
Tear propagation strength (DIN 53515/ISO 34): approx. 14 N/mm
Solvent content:0%.
Isocyanate content: 0%.
Temperature resistance : -40°C to +120°C
Application temperature : +5°C to +35°C
UV and weather resistance: Excellent
